tsp www.vishay.com vishay dale thin film revision: 15-mar-13 1 document number: 60037 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 molded, commercial, single in-line thin film resistor, through hole network (standard) designed to meet mil-prf-83 401 characteristic v and h these resistor networks are available in 6 pins, 8 pins and 10 pins styles in both standard and custom circuits. they incorporate vishay dale thin films patented passivated nichrome film to give superi or performance on temperature coefficient of resistance, thermal stability, noise, voltage coefficient, power handling and resistance stability. the leads are attached to the metallized alumina substrates by thermo-compression bonding. the body is molded thermoset plastic with gold pl ated copper alloy leads. this product will outperform all of the requirements of characteristic v and h of mil-prf-83401. features ? lead (pb)-free gold plat ed terminals standard ? gold to gold terminations (no internal solder) ? exceptional ratio stability over time and temperature ( ? r 0.015 % 2000 h at 70 c) ? rugged low profile molded case 6 pins, 8 pins, and 10 pins available ? compatible with automa tic insertion equipment ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note * lead (pb)-containing terminations are not rohs-compliant. exemptions may apply. typical performance schematic note (1) consult factory for tc r tracking specific ations 01 schematic actual size absolute tracking tcr 25 2 absolute ratio tol. 0.1 0.05 standard electrical specifications test specifications conditions material passivated nichrome - pin/lead number 6, 8, 10 - resistance range 100 ? to 200 k ? per resistor - tcr: absolute 25 ppm/c (standard) - 55 c to + 125 c tcr: tracking 2 ppm/c (typical less 1 ppm/c equal values) (1) - 55 c to + 125 c tolerance: absolute 0.1 % to 1.0 % + 25 c tolerance: ratio 0.05 % to 0.1 % to r 1 + 25 c power rating: resistor 0.100 w (per element typical at + 25 c) maximum at + 70 c power rating: package 0.500 w maximum at + 70 c stability: absolute ? r 0.05 % 2000 h at + 70 c stability: ratio ? r 0.015 % 2000 h at + 70 c voltage coefficient < 0.1 ppm/v - working voltage 100 v - operating temperature range - 55 c to + 125 c - storage temperature range - 55 c to + 125 c - noise < - 30 db - thermal emf < 0.08 v/c - shelf life stability: absolute ? r 0.01 % 1 year at + 25 c shelf life stability: ratio ? r 0.002 % 1 year at + 25 c 1 schematic 01 234 n 1 schematic 03 23 4 n n-1 1 schematic 06 234 n
tsp www.vishay.com vishay dale thin film revision: 15-mar-13 2 document number: 60037 for technical questions, contact: thinfilm@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions and imprinting in inches and millimeters dimension inches millimeters a 0.035 0.89 b 0.040 1.02 c 0.100 0.005 non-accum. 2.54 0.13 d 0.019 0.006 typical 0.48 0.15 e 0.187 0.010 4.75 0.25 f 0.135 3.43 g 0.095 2.41 h 0.012 0.004 0.31 0.10 l (6 pins) 0.583 0.015 14.81 0.38 l (8 pins) 0.783 0.015 19.89 0.38 l (10 pins) 0.983 0.015 24.97 0.38 construction mechanical specifications resistive element passivated nichrome or tantalum nitride substrate material alumina body molded epoxy terminals copper alloy plating nickel/gold model tsp - lead (pb)-free standard gold plated model tsps - lead (pb)-free solder coated option sn96.5, ag3.0, cu0.5 model tspl - tin/lead solder coated option sn63 tin/lead and lead (pb)-free finish hot solder dip global part number information new global part nu mbering: tsp6011002buf global model (3 or 4 digits) pin count (1 or 2 digits) schematics tcr characteristics resistance tolerance and ratio tolerance packaging tsp (lead (pb)-free) (e4) tspl (tin/lead) tsps (lead (pb)-free) (e1) 6 8 10 01 (1) = 5, 7 or 9 resistors with pin 1 common 03 = 3, 4 or 5 isolated resistors 06 = 5, 7 or 9 series connected r = 25 ppm/c (2) h = 50 ppm/c k = 100 ppm/c first 3 digits are significant figures and the last digit specifies the number of zeroes to follow. e.g.: 1001 = 1k 1002 = 10k absolute a = 0.1 % (3) b = 0.1 % c = 0.25 % d = 0.5 % f = 1.0 % ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % uf = tubed note (2) 01 schematic greater than 250 ? only note (1) consult factory for tcr tracking specifications 01 schematic note (3) tol. available on 1k and up only. r 1 is reference resistor. historical part number example: tsp 803r1001f (for reference purposes only) tsp 8 03 r 1001 f series pins schematic tcr characteristic resistance tolerance and ratio tolerance l a indicates pin 1 b cd e f g h vishay logo part number date code high purity alumina substrate gold plated copper leads gold to gold thermo-compression bond (no internal solder) sputtered tamelox film system ps1011 0 ts 02c 0 uf p6 1 1 0 ts 02b 0 uf
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
